0 item(s) / Total: $0  
Home > Product Identification
 

Product Identification

Identify your Andersen Product
 
Andersen® windows and patio doors have the Andersen logo etched in the glass. The logo is located on the interior bottom right-hand corner of the window. See example below. Older products logo may be in a different corner. Do not mistake the Andersen logo with the tempering logo if you have safety glass.
How to find your Product's manufacturing date:
 
Your manufacturing date identifies the vintage of your prodcut. The date can be found in the logo etched into the glass.
 
Older Product Glass Information: Click Here

Example of Tempered Safety glass. Used in products where local building codes designate safety glazing is required.

If your product is 2007 or newer locate the product ID label. See below for specific Product ID label location or click the icon below for the Andersen PDF:
 
 
DOUBLE HUNG: ON INTERIOR OF HEAD JAMB. READABLE FROM THE INTERIOR OF THE HOME WHEN UPPER SASH IS PULLED DOWN.

GLIDING WINDOW: ON INTERIOR OF HEAD JAMB. READABLE FROM THE INTERIOR OF THE HOME WHEN WINDOW IS OPEN.

CASEMENT/AWNING WINDOW: HEAD END ON THE SAME LEVEL AS THE HINGE. READABLE FROM THE INTERIOR OF THE HOME WHEN WINDOW IS OPEN.

STATIONARY UNITS: ON THE INTERIOR OF THE FRAME UNDER THE SILL STOP NEAR THE GLASS LOGO. READABLE FROM THE INTERIOR, BUT ONLY WHEN THE STOP IS REMOVED.

GLIDING DOOR: OPERATOR SIDE OF HEAD JAMB. READABLE FROM THE INTERIOR OF HOME WHEN OPERATING DOOR IS OPEN.

HINGED DOOR: ON HEAD JAMB FRAME COVER. VISIBLE BY LOOKING UPWRDS AT THE RIGHT SIDE OF FRAME VIEWED FROM THE EXTERIOR.

OUTSWING HINGE DOOR: ON HEAD JAMB COVER. VISIBLE BY LOOKING UPWARS AT THE FRAME WHEN THE DOOR IS OPEN.